|
|
|
|
113-17301 Silver Radiator Guard |
|
|
|
|
Our Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. Then we hard anodize every one for a chip-free, tough finish! Installation Instructions:
1st: Remove two upper factory radiator
guard mount bolts. Lift guard out of the lower pin mounting holes and remove.
2nd: Install the guard into the lower two pin mount
points.
3rd: Install the two supplied plastic washers on
the factory upper mount bolts
Install the two upper mount bolts with washers
between the bolts and the radiator guard, loosely. Then center guard
appropriately and tighten the upper mount bolts as the tabs find home.
|
|
|
|
|
|